B22 vs E27: Which Light Bulb Do I Need? A Simple UK Guide
You've bought a new lamp, got it home, and the bulb from the drawer won't fit. Or it fits but makes the living room feel like a dentist's waiting room. Choosing a bulb comes down to three things: the fitting (does it fit?), the colour temperature (how warm does it look?) and the lumens (how bright is it?).
The quick answer: B22 is a bayonet fitting: you push the bulb in and twist. E27 is a screw fitting: you screw the bulb in. Both are about the same size, and UK homes use both, so check the old bulb or the lampholder before you buy. For living rooms and bedrooms, choose warm white (2700K–3000K). For a bulb as bright as an old 60W, look for about 800 lumens.
Below: how to identify every common UK fitting, which colour suits each room, and how many lumens you need.
What's the difference between B22 and E27?
| B22 (bayonet) | E27 (Edison screw) | |
|---|---|---|
| Also called | BC, bayonet cap | ES, Edison screw |
| Base diameter | 22mm | 27mm |
| How it fits | Push in and twist (two side pins lock it in) | Screw in clockwise |
| Common in | Traditional UK ceiling pendants, older table lamps | Floor lamps, modern pendants, decorative and vintage-style fittings |
| Decorative bulb choice | More limited | Widest range, including most Edison filament bulbs |
Which is better? Neither is better electrically. B22 has been the traditional UK fitting, so many ceiling roses and older lamps use it. E27 is the international standard, so newer lamps, imported fittings and decorative bulbs, including most vintage-style filament bulbs, are far more likely to be E27.
How to tell which bulb fitting you have
- Read the old bulb. The fitting is usually printed on the base or the glass: "B22", "BC", "E27" or "ES".
- Look at the base. Two small pins sticking out of a smooth metal base means bayonet (B22 or B15). A threaded, spiral base means screw (E27 or E14).
- Look inside the lampholder. Two L-shaped slots means bayonet. A threaded inside means screw. Two small round holes in a recessed spotlight means GU10.
- Check the lamp's label or manual. Most lamps list the fitting and maximum wattage near the lampholder.
Always switch off and let the old bulb cool before removing it.
Every common UK bulb fitting at a glance
| Fitting | Type | Size | Where you'll find it |
|---|---|---|---|
| B22 (BC) | Large bayonet | 22mm | Ceiling pendants, table lamps |
| B15 (SBC) | Small bayonet | 15mm | Small lamps, cooker hoods, some chandeliers |
| E27 (ES) | Large screw | 27mm | Floor lamps, pendants, decorative fittings |
| E14 (SES) | Small screw | 14mm | Chandeliers, candle bulbs, small table lamps |
| GU10 | Two-pin twist-lock | Pins 10mm apart | Kitchen and bathroom spotlights, downlights |
Can I put an E27 bulb in a B22 fitting?
Not directly, but you can with a B22-to-E27 adapter, which pushes into the bayonet holder and gives you a screw socket. Adapters are a handy way to use decorative E27 filament bulbs in an older B22 pendant. Two checks before you use one: the adapter adds a few centimetres of length, so make sure the bulb still fits inside the shade, and never exceed the fitting's stated maximum wattage. Where you can, it's simpler to buy a bulb with the correct fitting.
Warm white vs cool white: which colour for each room?
Colour temperature is measured in kelvin (K). Lower numbers give a warm, yellow-orange glow; higher numbers give a whiter, bluer light.
| Colour | Kelvin | Feels like | Best for |
|---|---|---|---|
| Extra warm / amber | 2000K–2200K | Candlelight | Decorative filament bulbs, cosy corners |
| Warm white | 2700K–3000K | Traditional bulb | Living rooms, bedrooms, dining rooms, hallways |
| Cool / natural white | 3500K–4000K | Bright, neutral | Kitchens, home offices, bathrooms, utility rooms |
| Daylight | 5000K–6500K | Bright daylight | Garages, workshops, task lighting, make-up areas |
Rule of thumb: use warm light where you relax and cooler light where you work. Mixing different colours in one room usually looks patchy, so keep to one colour temperature per room, or at least per fitting type.
This is why vintage-style Edison filament bulbs suit living rooms so well: most give a warm, amber-tinted light that flatters wood, fabric and skin tones. They're best used where the bulb is on show, such as in open pendants, cage shades and floor lamps with exposed bulbs.
How many lumens do I need?
Lumens measure brightness. Watts measure power used. Since LEDs use a fraction of the power of old incandescent bulbs, ignore watts and compare lumens instead.
| Old incandescent bulb | LED equivalent (approx. lumens) |
|---|---|
| 25W | 250 lm |
| 40W | 470 lm |
| 60W | 806 lm |
| 75W | 1,055 lm |
| 100W | 1,521 lm |
Lumens by room (rule of thumb)
Total brightness across all the lights in the room, as a starting point:
| Room | Lumens per m² | Example: 12m² room |
|---|---|---|
| Living room | 150–300 | 1,800–3,600 lm |
| Bedroom | 100–200 | 1,200–2,400 lm |
| Kitchen | 300–400 | 3,600–4,800 lm |
| Bathroom | 300–400 | 3,600–4,800 lm |
| Hallway | 50–100 | 600–1,200 lm |
| Home office | 300–500 | 3,600–6,000 lm |
Don't try to get all of this from one ceiling light. Layering works better: a ceiling light for general light, a floor lamp for a reading corner, and a table lamp or two for mood. Our floor lamp buying guide explains how to place them, and our pendant & ceiling light buying guide covers what to hang overhead.
Dimmable bulbs: what to check
Not every LED bulb can be dimmed. If your light is on a dimmer switch:
- Buy bulbs clearly marked "dimmable". A non-dimmable LED on a dimmer may flicker, buzz or fail early.
- Check the dimmer is LED-compatible. Many older dimmers were designed for higher-wattage incandescent bulbs and can struggle with low-wattage LEDs. An LED-compatible (often "trailing edge") dimmer usually fixes flickering.
- Mind the minimum load. Some dimmers need a minimum total wattage. With several low-wattage LEDs on one circuit this is rarely an issue; with one bulb it can be.
Quick bulb checklist before you buy
- Fitting: B22, E27, E14, B15 or GU10? Check the old bulb.
- Brightness: compare lumens, not watts.
- Colour: 2700K–3000K for living spaces, 4000K for work spaces.
- Dimmable: only if the light is on a dimmer, and check the dimmer is LED-compatible.
- Shape and size: make sure the bulb fits inside the shade, especially for decorative globe or filament bulbs.
- Max wattage: never exceed the wattage stated on the lamp or fitting.
Frequently asked questions
Is B22 the same as E27?
No. B22 is a 22mm bayonet fitting that pushes in and twists, while E27 is a 27mm screw fitting. They aren't interchangeable without an adapter.
Which is more common in the UK, B22 or E27?
Both are common. B22 bayonet is the traditional UK fitting and is still widely found in ceiling pendants and older lamps. E27 is increasingly common in new lamps, imported fittings and decorative bulbs, so many homes have a mix of both.
What does ES mean on a light bulb?
ES stands for Edison Screw, the screw fitting known as E27. SES (Small Edison Screw) is the smaller E14 fitting.
What colour light bulb is best for a living room?
Warm white, around 2700K–3000K. It gives the soft, cosy glow most people want for relaxing, and it flatters furniture, fabrics and skin tones.
How many lumens is a 60W bulb?
A traditional 60W incandescent bulb gives about 800 lumens (806 lm is the standard equivalent). Look for an LED of around 800 lumens to replace it.
Can I use an LED bulb in any lamp?
Usually, yes, as long as the fitting matches and the bulb fits inside the shade. LEDs use far less power than the maximum wattage most lamps allow. If the lamp is on a dimmer, choose a dimmable LED.
What's the difference between E14 and E27?
Both are screw fittings, but E14 is 14mm across and E27 is 27mm. E14 bulbs are used in chandeliers, candle bulbs and small lamps, and E27 in most floor lamps and pendants.
Find your next light
Browse ceiling lights, floor lamps and warm-white LED Edison bulbs in our Lighting & Ambience collection, with free UK delivery and 30-day returns. Then use our guide to making your living room cosy this winter to put it all together.
